Skip to content
Call
A man kneels with his back to the camera at the end of a white marble island in a pale-oak kitchen, peak autumn outside.

Electrical · Repairs

Troubleshooting and Code Repairs in MA, NH & ME

Dead outlets, tripping breakers and the items your town or inspector flagged.

The short answer

Find the cause, then fix it once

Troubleshooting and code repairs means tracing an electrical fault to its cause and fixing it, or correcting items a home inspector or the town has flagged. We tell you why it happened, not just that it is fixed.

Priced after a look

Every job of this kind is different, so an owner replies the same business day with a typical range, and the exact price comes in writing after we see it.

Confirmed after a site visit

A breaker that keeps tripping, an outlet that died, lights that flicker: each has a cause, and resetting the breaker does not fix it. We trace the circuit, find the fault and repair it. When a home sale stalls on an inspection list, missing GFCI protection, open junction boxes, double-tapped breakers or ungrounded outlets, we correct each item and stay through the re-inspection.

Battery lantern on a basement floor lighting a gray breaker panel where one breaker sits out of line with the rest
  1. Describe the problem

    What happens, when, and any inspection list you have.

  2. Trace and price

    We find the cause and price the fix before we start.

  3. Repair and re-inspect

    Fixed to code, and we stay for the re-inspection when there is one.

Repairs done right

Fixed, explained and signed off

A hallway ceiling light with its glass shade set on a drop cloth beside a wooden step stool, doors closed, autumn outside.

Traced to the cause

Not a reset and a hope.

White vessel sink on a floating oak vanity with a GFCI outlet set in glossy subway tile beside it

Inspection items cleared

GFCI, grounding, boxes and breakers to code.

Empty living room with a marble fireplace between lit sconces, white built-ins and a stack of taped moving boxes

Before your closing

Scheduled around the sale date.

While we're there

A labeled panel you can actually use

Many older panels have missing or wrong labels, which makes every future repair slower. When we troubleshoot a circuit, we fix the label for it, and on request we map and label the whole panel so the next outage or repair starts with the right breaker.

Gray breaker panel cover with two columns of breakers, each marked by a small blue, green or orange dot

Questions

Troubleshooting and Code Repairs: common questions

Get a price range
Why does my breaker keep tripping?

Usually an overloaded circuit, a short or a ground fault, and sometimes a failing breaker. Each needs a different fix, so we trace it before replacing anything.

Can you fix the electrical items on my home inspection report?

Yes. Send us the list; we price each item and correct them before closing, then stay through the re-inspection if the town requires one.

Is a flickering light dangerous?

It can be. One flickering fixture is often a bulb or a loose connection; flickering across several rooms can point to a service or neutral problem and is worth a call the same day.

Get a typical price range, then a firm quote after a look

Tell us the job and the town. An owner replies the same business day with a typical range, and the exact price comes in writing after we see the panel.

Read our Google reviews⁠