
Electrical · Panels
Panel Upgrades in MA, NH & ME
100A to 200A, permitted and inspected, ready for any future power upgrade.
The short answer
Why the panel is usually the first job
A panel upgrade replaces your main electrical panel, usually going from 100 amps to 200 amps, so the house can carry modern loads safely. A 100A to 200A upgrade falls in a national guide range of $1,300 to $2,500 (HomeGuide and Inch Calculator panel upgrade cost guides); your own price comes in writing after we see the panel.
National guide range
$1,300 to $2,500
100A to 200A main panel upgrade, installed
Source: HomeGuide and Inch Calculator panel upgrade cost guides
National guide range
$2,500 to $5,000
Panel upgrade that also needs a new utility service
Source: Inch Calculator, electrical panel upgrade cost guide
Confirmed after a site visit
An EV charger and a heat pump each add a large circuit, and a 100-amp panel built decades ago often has neither the capacity nor the breaker spaces for them. We run a load calculation, replace the panel, coordinate the utility disconnect and reconnect, and guide through the town inspection. Done once, it sets the house up for everything that comes after.

A typical range the same day
Tell us the house and the panel; an owner replies with a typical range.
Look and firm price
We check the panel, service and meter, then put the exact price in writing.
Permit, swap, inspect
We pull the permit, coordinate the utility, upgrade the panel and pass inspection.
Done once
A panel ready for what comes next

Load calculation first
You know what the house needs before we start.

Utility coordinated
Disconnect, meter and reconnect scheduled for you.

Inspected before we leave
Permit pulled, inspection passed.
Older homes
Fuse boxes and 60-amp services
Many older New England homes still run on fuses or a 60-amp service. Those panels were not built for today's kitchens, let alone an EV or a heat pump, and some insurers ask about them. In homes built before 1980, replacing it is often the first job, before anything new is added.

Questions
Panel Upgrades: common questions
How much does a panel upgrade cost?
A 100A to 200A upgrade falls in a national guide range of $1,300 to $2,500 (HomeGuide and Inch Calculator panel upgrade cost guides), and in a national guide range of $2,500 to $5,000 (Inch Calculator, electrical panel upgrade cost guide) when the utility service also needs an upgrade. Those are national figures, not our price: we give you a range for your house first and a firm written price after a look.
How do I know if my panel needs an upgrade?
Common signs: a 100-amp or smaller main breaker, a fuse box, no open breaker spaces, breakers that trip often, or plans for an EV charger, a heat pump or a generator.
How long will the power be off?
Usually most of one working day. We coordinate the disconnect and reconnect with the utility and tell you the window in advance.
Do you pull the permit?
Yes. Every panel upgrade is permitted and inspected, and we stay until the inspector signs off.
Can you install a SPAN smart panel instead of a standard panel?
Yes. We install SPAN equipment and we are a SPAN certified installer. A SPAN panel is a smart electrical panel that shows and controls each circuit from an app, and it can go in where a standard panel would. Ask for it when we look at your panel.
Related work
Often done in the same visit

New Construction Wiring
Rough-in to final for new homes and additions.

EV Chargers
A Level 2 charger on its own circuit, sized to your panel.

Heat Pump Wiring
Dedicated circuits and disconnects for mini-splits and ducted heat pumps.
Get a typical price range, then a firm quote after a look
Tell us the job and the town. An owner replies the same business day with a typical range, and the exact price comes in writing after we see the panel.