Not always. Many homes can add a heat pump or a Level 2 EV charger on their current service once a load calculation shows there is room. When the calculation comes up short, which is common when a heat pump and an EV charger land on one house, the answer is a 200 amp service upgrade, in a national guide range of about $1,300 to $2,500 (HomeGuide, 2026). The deciding number is your home's calculated load, not the size of the panel door.

How does an electrician decide if my panel can handle it?
- We list what the house already runs: range, dryer, water heater, well pump, air conditioning and baseboard heat.
- We add the new loads: the heat pump's rated circuit, the charger's circuit, and anything else you plan in the next few years.
- We run the load calculation the electrical code sets out, and check the service size, the meter and the open breaker spaces.
- If the numbers fit, we add the circuits. If they are close, a load management device can share capacity. If they do not fit, we plan the upgrade.
Should I plan the heat pump and the charger together?
Yes, if both are coming within a few years. They draw on the same panel capacity, so we size the panel once for both. Doing the panel, the heat-pump circuit and the charger as one project means one permit, one inspection and one crew.
When a 200 amp service usually comes up
One new circuit on a lightly loaded 200 amp panel
- What we usually find
- Room to add it after the load calculation
Heat pump plus EV charger on a 100 amp service
- What we usually find
- Often short; an upgrade or load management is needed
Heat pump and EV charger planned together
- What we usually find
- Plan the panel once for both
No open breaker spaces or an older panel
- What we usually find
- Panel replacement, often with the service upgrade
| Your situation | What we usually find |
|---|---|
| One new circuit on a lightly loaded 200 amp panel | Room to add it after the load calculation |
| Heat pump plus EV charger on a 100 amp service | Often short; an upgrade or load management is needed |
| Heat pump and EV charger planned together | Plan the panel once for both |
| No open breaker spaces or an older panel | Panel replacement, often with the service upgrade |

What does a 200 amp upgrade cost?
HomeGuide puts a 100 amp to 200 amp upgrade at $1,300 to $2,500, or $1,800 to $2,500 when a new service panel is needed. Inch Calculator notes it can reach about $5,000 when the utility's service line also has to be upgraded. These are national guide figures, not our price; we give you a range for your house after a look at the panel and the meter.
Are there rebates for the wiring?
The federal home charger credit (section 30C) ended for property placed in service after June 30, 2026, according to the IRS. In Massachusetts, Eversource's home charging page lists rebates of up to $1,400 toward the wiring or panel work for a Level 2 charger, tied to its managed charging program. Amounts and rules change, so confirm with your utility before you buy.
Frequently asked questions
- Can a 100 amp panel handle an EV charger?
- Sometimes. A load calculation shows whether there is room. If there is not, a load management device or a 200 amp upgrade solves it.
- Do heat pumps need a 200 amp service?
- Not by default. The heat pump's rated circuit plus your existing loads decide it. Homes adding a heat pump and an EV charger together more often need the upgrade.
- Should I upgrade the panel before adding a heat pump?
- If an EV charger is in your plans too, size the panel once for both. We do the panel and the new circuits as one project.
Sources
- HomeGuide, cost to replace or upgrade an electrical panel (2026) (opens in a new tab)
- Inch Calculator, electrical panel upgrade cost guide (2026) (opens in a new tab)
- IRS, FAQs on changes to sections 25D and 30C under Public Law 119-21 (opens in a new tab)
- Eversource (Massachusetts), home EV charging rebates (checked Oct 21, 2026) (opens in a new tab)
