Skip to content
Call
A man seen from behind looks at a closed gray electrical panel in a bright utility room, a work light beside him

Electrical · 2 min read

How Much Does a 200 Amp Panel Upgrade Cost?

Nationally, a 100 to 200 amp panel upgrade typically runs $1,300 to $2,500, and up to about $5,000 when the utility's service line also needs work. Here is what moves the price.

All electrical guides

Updated

Nationally, a 100 amp to 200 amp panel upgrade typically costs $1,300 to $2,500 (HomeGuide, 2026), or $1,300 to $3,000 by This Old House's estimate. It can reach about $5,000 when the utility's service line has to be upgraded too (Inch Calculator). No public source publishes a New Hampshire or Massachusetts figure, so we give you a range for your own house after a quick look.

A pale blue clapboard gable wall with a service mast, weatherhead and drip loop above a gray meter, lilacs blooming

What does a 200 amp upgrade cost in 2026?

Typical 200 amp upgrade costs, national figures, 2026

  • 100 amp to 200 amp upgrade

    Typical range
    $1,300 to $2,500
    Source
    HomeGuide
  • Upgrade that needs a new service panel

    Typical range
    $1,800 to $2,500
    Source
    HomeGuide
  • Panel upgrade, broader estimate

    Typical range
    $1,300 to $3,000
    Source
    This Old House
  • Upgrade with the utility service line

    Typical range
    Up to about $5,000
    Source
    Inch Calculator
  • Electrician labor

    Typical range
    $50 to $130 an hour
    Source
    HomeGuide

What moves the price up or down?

  • Whether the meter socket and service entrance cable must be replaced along with the panel.
  • Utility coordination to disconnect and reconnect the service, and any upgrade on the utility's side.
  • Grounding and bonding brought up to current code.
  • Moving the panel to a new location, or patching walls around it.
  • The town permit and inspection.
A closed gray electrical panel set flush in the white wall of a mudroom with slate floor tiles and tall cabinets

Why upgrade to 200 amps?

Most upgrades happen because a household is adding something big: a heat pump, a Level 2 EV charger or a standby generator. A 200 amp service gives room for those loads together. If one of them is on your list, we plan the panel around all of them so the work is done once.

How does HighPoint price a panel upgrade?

We look at the panel, the meter and the service drop, then send a written price range for your house. We pull the electrical permit, coordinate with the utility and schedule the town inspection. Ask for a price range online or call or text (603) 270-4982.

Frequently asked questions

How much does it cost to upgrade from 100 to 200 amp service?
Nationally, $1,300 to $2,500 is typical (HomeGuide, 2026), and up to about $5,000 if the utility's service line also needs upgrading (Inch Calculator).
Why do panel upgrade prices vary so much?
The panel itself is a small part of the cost. The meter socket, the service entrance, grounding, the panel location and any utility-side work move the price most.
Do you publish New Hampshire prices?
No public source publishes a New Hampshire or Massachusetts figure. We send a written range for your house after a look at the panel and meter.

Sources

  1. HomeGuide, cost to replace or upgrade an electrical panel (2026) (opens in a new tab)
  2. This Old House, cost to upgrade an electrical panel (2026) (opens in a new tab)
  3. Inch Calculator, electrical panel upgrade cost guide (2026) (opens in a new tab)

Get a typical price range for your job next

Tell us the job and the town. An owner replies the same business day with a typical range, and the exact price comes in writing after we see the panel.

Read our Google reviews⁠