
Electrical · Heat pumps
Heat Pump Wiring in MA, NH & ME
Dedicated circuits and disconnects for mini-splits and ducted heat pumps.
The short answer
Read the nameplate, then the panel
Heat pump wiring is the electrical side of a heat pump install: the dedicated circuit, the outdoor disconnect and the panel capacity the unit needs. Your HVAC installer sets the unit; we give it the power.
Priced after a look
Every job of this kind is different, so an owner replies the same business day with a typical range, and the exact price comes in writing after we see it.
Confirmed after a site visit
Every heat pump lists its circuit size on the nameplate. We size the breaker and wire to it, mount a weatherproof disconnect within sight of the outdoor unit, and confirm the panel can carry the new load on the coldest day of the year. If the panel is short on room, we plan the upgrade with you before the HVAC crew arrives, so the install day is not held up.

Get the unit specs
From you or your HVAC installer: the model and its circuit size.
Check the panel
A load calculation with the heat pump added, and a plan if it does not fit.
Wire and inspect
Circuit, disconnect and inspection, timed to the HVAC install.
Heat pump ready
The electrical side, done before install day

Sized to the nameplate
The right breaker and wire for the unit.

Disconnect in sight
Mounted beside the outdoor unit, to code.

Timed to the HVAC crew
Power ready the day the unit is set.
Leaving oil, propane
Switching fuels changes the panel math
Moving from an oil or propane boiler to heat pumps shifts the house's heating load onto the electrical panel. That is the moment to check capacity, and often the moment to plan for an EV charger too, so the panel is only changed once.

Questions
Heat Pump Wiring: common questions
Does a heat pump need its own circuit?
Yes. Each outdoor unit needs a dedicated circuit sized to its nameplate, plus a disconnect within sight of the unit.
Will I need a panel upgrade for a heat pump?
Sometimes. Homes moving off oil or propane often add a large new load, and a 100-amp panel may not carry it with everything else. We run the numbers first.
Do you work with my HVAC company?
Yes. We schedule the electrical work around their install date so the system can be started the day it is set.
Related work
Often done in the same visit

Panel Upgrades
100A to 200A, permitted and inspected, ready for any future power upgrade.

EV Chargers
A Level 2 charger on its own circuit, sized to your panel.

Standby Generators
A whole-home generator that starts on its own when the power drops.
Get a typical price range, then a firm quote after a look
Tell us the job and the town. An owner replies the same business day with a typical range, and the exact price comes in writing after we see the panel.