
Solar · Commercial
Commercial Solar in MA, NH & ME
Rooftop arrays for shops, offices and metal buildings, with the utility interconnection done in-house.
The short answer
Flat roofs and metal roofs make strong solar sites
Commercial solar is a rooftop or ground array sized for a business building, from a small shop roof to a long metal warehouse. We lay it out, pull the permits and do the interconnection with our own licensed crew.
Commercial buildings often have exactly what solar wants: big open roofs, few vents and a daytime power load that lines up with the sun. Standing-seam metal takes clamp-on mounts with no roof penetrations, and flat roofs take ballasted racks. We size the array to the building's daytime use, check the service and switchgear, and handle the utility interconnection.
Usage and roof review
Twelve months of bills and a roof survey set the size and the layout.
Written proposal
System size, production estimate, price and the paperwork the utility needs.
Install and interconnect
We install around your business hours and turn it on after the utility signs off.
Commercial work
Built for the building and the business

No-penetration mounts
Seam clamps on metal roofs, ballast on flat ones.

Switchgear handled
Service and interconnection by our own licensed crew.

Around your hours
Shutdowns scheduled when they cost you least.
Daytime load
A business uses power when the sun is up
Shops, offices and workshops draw most of their power during working hours, the same hours a rooftop array produces. That match is why commercial systems often use most of what they make on site. Send us twelve months of bills and we will show you how much of the load the roof can carry.

Questions
Commercial Solar: common questions
Can solar go on a metal roof?
Yes. Standing-seam metal is one of the best roofs for solar, because clamp-on mounts attach to the seams without drilling through the roof.
Will the install disrupt my business?
Most of the work is on the roof. We schedule the short shutdown for the interconnection outside your busy hours.
Do you install systems for multifamily buildings?
Yes. Flat-roofed multifamily buildings are a good fit: ballasted racks sit on the roof without drilling through it.
Related work
Often done in the same visit

Residential Solar Installation
Panels, inverter and the panel-side wiring, installed by one licensed crew.

Solar Maintenance
Production checks, inverter faults and loose connections, found and fixed.

Service for systems we didn't install
If your installer went under, we service systems we did not install.
See your 25-year number before anyone calls you
Two numbers in to see 25 years of savings. Leave your number only if you want a call, and an owner replies in the same business day.
